Repair and Fix Wet Water Damaged Mobile Phone
Switch OFF the mobile phone and Remove the back cover and the battery.
Using a precision screwdriver, disassemble the mobile phone. This is very easy. Just remove all the screws and keeps them in a safe place. Make sure to remember the order in which you disassemble the mobile phone. This will be useful when you assemble it back.
If there is water in the display then you will also have to disassemble and remove the display.
Using a hot air blower , carefully dry out the PCB of the Mobile Phone and all other wet parts. You can also keep the disassembled mobile phone in sunlight and let it dry naturally.
Using an ESD-Safe brush and IPA solution or spirit, clean the circuit carefully. This prevents corrosion on the PCB.
Now assemble back the mobile phone carefully.
Switch OFF the mobile phone and Remove the back cover and the battery.
Using a precision screwdriver, disassemble the mobile phone. This is very easy. Just remove all the screws and keeps them in a safe place. Make sure to remember the order in which you disassemble the mobile phone. This will be useful when you assemble it back.
If there is water in the display then you will also have to disassemble and remove the display.
Using a hot air blower , carefully dry out the PCB of the Mobile Phone and all other wet parts. You can also keep the disassembled mobile phone in sunlight and let it dry naturally.
Using an ESD-Safe brush and IPA solution or spirit, clean the circuit carefully. This prevents corrosion on the PCB.
Now assemble back the mobile phone carefully.
No comments:
Post a Comment